LabShopOnline.COM

SRI ASTM 6584 BioDiedel GC System

ASTM 6584 BioDiedel GC System

For the laboratory or field portable

8610C or 310 GC chassis (your choice)
FID Detevtor
On-column injector
15 meter wide-bore capillary column
PeakSimple Date System
Small enough to fly as airline baggage
Perfect for testing BioDiesel at low cost

The SRI BioDisel GC System is configured to perform ASTM 6584 (residual free and bound Glycerin in BioFuel). Analysis takes about 25 minutes and is simple enough for an untrained operator to perform in the lab or in the field. The included PeakSimple Date System displays the calibrated results directly without off-line calculations. This gas chromatograph satisfies all of the requirements of ASTM 6584 for a fraction of the cost of competitive instruments and includes 4 hours of operator training and a 2 year warranty.

Pictured above is the BioDiesel GC configured on the compact 310 chassis.

SRI Greenhouse Gas GC System

Greenhouse Gas GC System

The Greenhouse Gas GC is designed for the detection of carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O). Depending upon the volume of the sample loop on the gas sampling valve, it can detect trace levels or high concentrations. It may be used for stack or ambient air monitoring, or in a plane for atmospheric air analysis. The chromatogram below was generated by a Greenhouse Gas GC with a 5mL sample loop.

Features:

lECD and FID detectors

lMethanizer accessory (built-in)

lDual packed columns with precolumn

l10-port gas sampling valve and sample loop

lInternal whisper-quiet air compressor

l6 channel PeakSimple data system

lon the compact 8610C chassis

(VOLTAGE default is 110VAC, can be configured to 220VAC.)

Op Options & Upgrades:

lAdditional detectors

lSplit/Splitless and PTV injectors

The The Greenhouse GC is not limited to CO₂, CH₄ and N₂O. The FID-Methanizer detects hydrocarbons as well as CO and CO₂ (as methane). The sensitive ECD detector responds to electronegative compounds, especially chlorinated, fluorinated, or brominated molecules like PCBs and pesticides. With a low-volume sample loop, the Greenhouse GC can be used to measure gases produced by bacterial metabolic processes and life cycles.

The Greenhouse Gas GC uses a 10-port gas sampling valve plumbed with precolumn backflush.

SRI Capillary FID GC System

Capillary FID GC System

The Capillary FID GC System is a state of the art, general purpose temperature programmable GC in a compact, low-cost package. It includes everything you need to separate and detect fuels and other hydrocarbon compounds. In addition to a wide range of general gas chromatography applications, the Capillary FID GC System is excellent for both environmental testing and quality control applications.

Features:

· FID Detector

·30 meter Capillary Column

·Built-in, "whisper quiet" Air Compressor

·1 Channel PeakSimple Data System
...on the compact 8610C chassis

(VOLTAGE default is 110VAC, but can be configured as 220 VAC. )

Options & Upgrades:

·Additional detectors with 4 channel serial or 6 channal USB PeakSimple date system.

·Split/Splitless and PTV injectors.

·Methanizer, gas sampling valves, additional columns, H2-50XR hydrogen generator

The 30 meter capillary column can efficiently separate hydrocarbons up to C₄₀+. The On-column injector (for 0.53mm capillary columns) is good for liquid and gas sample with high and low boiling analytesno boiling point discrimination. The built-in, "whisper quiet" air compressor provides a nearly silent supply of combustion air for the FID detector, so an air cylinder is not required for most applications. The optional Split/Splitless injector upgrate allows for the use of 0.32mm, 0.25mm and smaller capillary columns. Our H2-50XR hyfrongen generator can supply enough hydrogen for carrier gas and FID combustion gas, including enough to operate a Split/Splitless injector for short periods.

The six chromatograms shown below resulted from analyzing various fuels with one of our Capillary FID GC Systems. The characteristic hydrocarbon range and fingerprint of each fuel is revealed. All six runs were performed under identical conditions.

1.00 cm Micro IR Quartz Cuvette (2 mm width)

Teysche Optics 1.00 cm micro IR quartz cuvette with lid.

Wavelength Range: 220 - 3500 nm

Materials: IR Quartz

Optical path: 10.0 mm

Width: 2 mm (perpendicular to the optical path)

Volume: ~0.7 mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

1.00 cm IR Quartz Cuvette

1.00 cm Near IR Quartz cuvette with lid.

Wavelength Range: 220 - 3500 nm

Materials: IR Quartz (see transmission spectra below)

Optical path: 10.0 mm

Width: 10 mm

Volume: ~3.4 mL

Suitbale for UV, Visible to NIR photometer measurements

1.00 cm Optical Glass Cuvette

1.00 cm optical glass cuvette with cap.

Wavelength Range: 330 - 2500 nm

Optical path: 10.0 mm

Width: 10 mm (perpendicular to the optical path)

Volume: ~3.4 mL

Suitbale for Visible to NIR photometer measurements

Made with high quality optical glass. Please see transmission spectra below.

1.00 cm Quartz Cuvette with Stopper

1.00 cm Far UV Quartz cuvette with Telflon Stopper.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (see transmission spectra below)

Optical path: 10.0 mm

Width: 10 mm

Volume: ~3.4 mL

Suitbale for UV, Visible to NIR photometer measurements

1.00 cm Micro Quartz Cuvette with Stopper (2 mm width)

Teysche Optics 1.00 cm micro UV quartz cuvette with Telflon Stopper.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (Far UV Quartz)

Optical path: 10.0 mm

Width: 2 mm (perpendicular to the optical path)

Volume: ~0.7 mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

1.00 cm Sub-Micro Quartz Cuvette

1.00 cm sub-micro UV quartz cuvette with cap.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (Far UV Quartz)

Optical path: 10.0 mm

Size: 45 x 12.5 x 12.5mm

Width: 2 mm (perpendicular to the optical path)

Volume: ~0.1 mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

1.00 cm Semi Micro Quartz Cuvette

91.00 cm semi-micro UV quartz cuvette with cap.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (Far UV Quartz)

Optical path: 10.0 mm

Width: 4 mm (perpendicular to the optical path)

Volume: ~1.4 mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

1.00 cm Micro Quartz Cuvette (1 mm width)

1.00 cm micro UV quartz cuvette with cap.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (Far UV Quartz)

Optical path: 10.0 mm

Size: 45 x 12.5 x 12.5mm

Width: 1 mm (perpendicular to the optical path)

Volume: ~0.35mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

1.00 cm Quartz Fluorescence Cuvette

1.00 cm quartz fluorescence cuvette with Teflon lid. All walls are carefully polished to allow maximum transparency.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (see transmission spectra below)

Optical path: 10.0 mm

Width: 10 mm

Volume: ~3.4 mL

Suitbale for UV, Visible to NIR photometer measurements

1.00 cm Micro Quartz Cuvette (2 mm width)

Teysche Optics 1.00 cm micro UV quartz cuvette with cap.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (Far UV Quartz)

Optical path: 10.0 mm

Width: 2 mm (perpendicular to the optical path)

Volume: ~0.7 mL

Packaging: wrapped with protecting film and packed in a plastic box.

Suitbale for UV/Visible to NIR photometer measurements

Warranty: 1 year.

Custom Cuvettes by Teysche Optics

Custom cuvettes available upon request!

Please send us an email enquiry to web@labshoponline.com with following information:

Materials (or wavelength requirements).
Dimensions or drawings in pdf format if available.
Order quantities.
Shipping address.

We will respond with pricing and delivery date information within 2 business days.

1.00 cm Quartz Cuvette

1.00 cm Far UV Quartz cuvette with lid.

Wavelength Range: 190 - 2500 nm

Materials: ES Quartz (see transmission spectra below)

Optical path: 10.0 mm

Width: 10 mm

Volume: ~3.4 mL

Suitbale for UV, Visible to NIR photometer measurements

50 uL AD,DAD AccuDil® Instrument Syringes

50 uL AD,DAD AccuDil® Instrument Syringes

(201500) 1705 DAD W/S 50 uL

Product Specifications
Volume	50 µL
Termination	DAD
Syringe Type	GASTIGHT
Syringe Series	1700
Sales Quantity	1 syringe per pack
Point Style	No Needle Included
Outer diameter	0.028 inch (0.7 mm)
Needle	Instrument Syringe
Minimum Temperature	10° C / 50° F
Maximum Temperature	115° C / 239° F
Maximum Pressure	500 psig (34.5 bar)
Max. Temp, w/ Cemented Needle	50° C / 122° F
Length	No Needle Included
Inner Diameter	0.006 inch (0.2 mm)
Gauge	No Needle Included
Gas Sterilized	Yes
Fluid Path	Borosilicate glass, PTFE
Autoclavable	Yes
Autoclavable	No

250 uL AD,DAD AccuDil® Instrument Syringes

250 uL AD,DAD AccuDil® Instrument Syringes

(201600) 1725DAD W/S 250ul SYR

Product Specifications
Volume	250 µL
Termination	DAD
Syringe Type	GASTIGHT
Syringe Series	1700
Std. Needle Dead Volume	N/A
Sales Quantity	1 syringe per pack
Point Style	No Needle Included
Outer diameter	0.028 inch (0.7 mm)
Needle	Instrument Syringe
Minimum Temperature	10° C / 50° F
Maximum Temperature	115° C / 239° F
Maximum Pressure	500 psig (34.5 bar)
Max. Temp, w/ Cemented Needle	50° C / 122° F
Length	No Needle Included
Inner Diameter	0.006 inch (0.2 mm)
Gauge	No Needle Included
Gas Sterilized	Yes
Fluid Path	Borosilicate glass, PTFE
Autoclavable	Yes

500 uL AD,DAD AccuDil® Instrument Syringes

500 uL AD,DAD AccuDil® Instrument Syringes

(201150) 1750AD W/S 500ul SYR

Product Specifications
Volume	500 µL
Termination	AD
Syringe Type	GASTIGHT
Syringe Series	1700
Std. Needle Dead Volume	N/A
Sales Quantity	1 syringe per pack
Point Style	No Needle Included
Outer diameter	0.028 inch (0.7 mm)
Needle	Instrument Syringe
Minimum Temperature	10° C / 50° F
Maximum Temperature	115° C / 239° F
Maximum Pressure	700 psig (48.3 bar)
Max. Temp, w/ Cemented Needle	50° C / 122° F
Length	No Needle Included
Inner Diameter	0.016 inch (0.4 mm)
Gauge	No Needle Included
Gas Sterilized	Yes
Fluid Path	Borosilicate glass, PTFE
Autoclavable	No

100 uL AD,DAD AccuDil® Instrument Syringes

100 uL AD,DAD AccuDil® Instrument Syringes

(201050) 1710AD W/S 100ul SYR

Product Specifications
Volume	100 µL
Termination	AD
Syringe Type	GASTIGHT
Syringe Series	1700
Std. Needle Dead Volume	N/A
Sales Quantity	1 syringe per pack
Point Style	No Needle Included
Outer diameter	0.028 inch (0.7 mm)
Needle	Instrument Syringe
Minimum Temperature	10° C / 50° F
Maximum Temperature	115° C / 239° F
Maximum Pressure	1000 psig (68.9 bar)
Max. Temp, w/ Cemented Needle	50° C / 122° F
Length	No Needle Included
Inner Diameter	0.006 inch (0.2 mm)
Gauge	No Needle Included
Gas Sterilized	Yes
Fluid Path	Borosilicate glass, PTFE
Autoclavable	No

250 uL AD,DAD AccuDil® Instrument Syringe

250 uL AD,DAD AccuDil® Instrument Syringe

(201100) 1725AD W/S 250ul SYR

Product Specifications
Volume	250 µL
Termination	AD
Syringe Type	GASTIGHT
Syringe Series	1700
Std. Needle Dead Volume	N/A
Sales Quantity	1 syringe per pack
Point Style	No Needle Included
Outer diameter	0.028 inch (0.7 mm)
Needle	Instrument Syringe
Minimum Temperature	10° C / 50° F
Maximum Temperature	115° C / 239° F
Maximum Pressure	500 psig (34.5 bar)
Max. Temp, w/ Cemented Needle	50° C / 122° F
Length	No Needle Included
Inner Diameter	0.006 inch (0.2 mm)
Gauge	No Needle Included
Gas Sterilized	Yes
Fluid Path	Borosilicate glass, PTFE
Autoclavable	No